Properly Selecting Electronic Components: Part 3by Vaughn D. Martin This time, investigate basic solid-state theory, diodes, rectifiers, transistor amplifiersm, and charaterize them.
Experiments with Alternative Energyby John Gavlik This time, we’ll use these same microcontroller circuits and code to illustrate three primary conditions that affect solar panel operation in the real world: heat, shading, and tilt angle.
Magnetic Pendulum by Tony Gasparovic Here’s a really fun project that will get a lot of attention. It’s an electronic pendulum that operates on the principle of magnetism.
Bicycle Gear Position Indicator by Dan Gravatt Here’s a couple of simple circuits to tell you what gear your bicycle is in while you’re pedaling down the road. I usually check what gear I am in by looking down at the front and rear gears. I decided I needed a better way after I bought a good road bike with 30 (!) gear combinations (three gears in front and 10 in back).
The ReFUSEable Box by Ron Newton This project was built for field troubleshooting and replaces blown fuses until the problem is solved. By dialing in the amperage, you can preset the drop-out point in the place of a fuse (200 mA – 5 amps). It is also known as a programmable relay. It displays the active AC or DC amperage being drawn when in the circuit.
Techknowledgey by Jeff Eckert Techknowledgey 2009 Topics covered include the world’s smallest reed switch, lasers that create new forms of metal, a new all-in-one PC, plus other stuff you’ll find fascinating.
Smiley’s Workshop by Joe Pardue Smiley’s Workshop: Some ALP Sensors (Part 14) Sensing light and temperature.
Getting Started With PICS by Chuck Hellebuyck Programming the PICDEM 2 Plus Development Board After getting everything set up — I used an MPLAB® ICD 2 for the programming tool because it is available bundled with the PICDEM 2 Plus board — I was ready to write some code.
Q&A by Russell Kincaid Reader Questions Answered Here Solar panel voltage regulator, op-amps and diodes, current sensing motor control, plus more.
Near Space by L. Paul Verhage Near Space I’m always on the look-out for neat stuff to do. So, when Mike Manes of EOSS posted over the GPSL* email list that Harbor Freight had discounted a vacuum pump that might be suitable for near space testing, I couldn’t resist. My creation takes near space testing to new lows and represents a unique use for an air-tight flour container that the manufacturer surely hadn’t intended.
The Spin Zone by Jon Williams LCDs & Things It must have been 1994 when I discovered how much I enjoy character LCDs. Like so many others, I got started thanks to Scott Edwards and his articles here in Nuts & Volts.
The Design Cycle by Fred Eady USB To Ethernet Using Microchip’s Free Stacks: Part 2 Now that we’ve had a taste of the free Microchip TCP/IP and USB stacks, it’s time to put the chocolate in the peanut butter. As promised, this month we’ll put a Microchip PIC18F14K50 Low Pin Count USB microcontroller in front of a PIC18F67J60 Ethernet microcontroller and put another RS-232 converter IC out to pasture.
Personal Robotics by Vern Graner The Dungeon Keeper So, how about we make an animatronic body for our talking skull and put him in a creepy coffin so he can beckon them forward with a flickering candle? Though this may sound like a pretty big project, it's actually rather straight-forward and, if you start now, you should be able to have your own Dungeon Keeper ready to thrill the kids and wow the parents for this Halloween!