Newsletter

Ballistic Chronograph Kit

Ballistic Chronograph Kit
Click to enlarge

More images

Click to enlarge
Price: $149.95
Product ID : SKU15898

Purchase

Description

The Ballistic Chronograph Kit contains everything you need to build a professional quality projectile speed measuring device. The kit uses exclusively through-hole parts to simplify assembly. The remote display unit allows you to position the measuring system in difficult or hard to reach locations, such as on the floor in the middle of your Hot Wheels car jump ramp or on the kitchen table next to your Nerf gun target. You can also place it in a safe position on a gun range for real bullet speed tests.

The kit includes all the parts listed here:

Sensor Components:

4 – Photo Sensor
4 – 0.1 Uf Capacitors
2 – 1 nF Capacitors
2 – PIC12F1822 (Programmed)
2 – MCP 601 8 Pin Chip
2 – 1 Meg 1/6 watt Resistors
2 – 10K 25 Trimmer Pot
2 – 10K 1/6 watt Resistors
2 – Printed Circuit Boards

Sensor Chassis:

1 – 14.21 x 4.88 x 2.01 Enclosure
1 – 9 volt Battery Clip
1 – DIN Socket 5 Pin Female

Display Components:

1 – 3.9 x 2 x .08 Clear Enclosure
2 – Red Led 3mm
1 – 0.1 Uf Capacitor
1 – 5 Volt Regulator
1 – PIC16F916 (Programmed)
1 – DIN Socket 5 Pin Female
1 – 2 LINE LCD Display
2 – Momentary Switch
2 – 680 ohm Resistors
1 – Printed Circuit Board

Hardware:

4 – 3/4" Wood Cubes
4 – 1/8" x 8" Wood Dowels
2 – DIN Socket 5 Pin Male
4 – 6-32 1/2" Screws
4 – 3/8" Spacer
2 – 8" x 2" 1 mm Styrene Pieces
4 – 3/8" L x 3/16" Styrene Tubes
1 – Wire Cable 10’
1 – 1/4 x 20 Hex Nut

*Battery and tripod not included

NOTE: This kit contains custom hand-fabricated components that are created specially for each order, so please allow additional time for preparation and delivery.

A Partial Kit is Available: Ballistic Chronograph PCBs and Programmed Chip Set

Product Reviews

Login or Register to write the first review.

Products You May Like

$24.95
$6.00
$6.00
$24.95
$6.00
$6.00